PW(Z)fully automatic self priming pump
Features of PW(Z)fully automatic vortex
self-priming electric pump:
The PW(Z)series fully automatic vortex self-priming electric pump is mainly composed of four parts:motor,water pump,seal and control system.The motor is an asynchronous motor,and the impeller structure of the electric pump is a vortex type,with the characteristics of small flow rate,high head, self-priming,etc.The electric pump is equipped with a control system,which realizes the automatic operation of the electric pump according to the change of water pressure or water flow,that is,the valve electric pump runs automatically,and the valve electric pump automatically shuts down without artificially turning off the power.This series with the function of stabilizing water supply, the electric pump is small in size, light in weight,compact in structure,simple and convenient to install.It is an ideal household electric pump for high efficiency,energy saving and safety.
Product introduction:
The PW(Z)series automatic pump is controlled by a microcomputer chip,which is efficient and energy-saving.It has delayed start-up,water shortage protection,and anti-card machine protection,and can automatically start and stop according to the change of water pressure or water flow.This series of products is small in size and low in noise,making it an ideal household booster pump.
Conditions of use:
1.The ambient temperature does not exceed 40°C.
2.The temperature of the conveying medium is 0-90°C
3.The PH value of the medium is between 6.5-8.5
4.The volume ratio of solid impurities in the conveying medium is not more than 0.1%,and the particle size is not greater than 0.2mm.
5.The power supply frequency is 50HZ,the voltage is single-phase AC 220V,and the voltage fluctuation range is rated voltage value 10.
6.Please do antifreeze when the temperature is below 0°C.
Model Description:
NAME OF PARTS
Technical Parameters
PW Exploded diagram
| NO. | Name of parts | NO. | Name of parts | NO. | Name of parts | ||||||||||
| 01 | Water flow switch | 08 | Mechanical seal | 15 | Electric capacity | ||||||||||
| 02 | Pressure tank | 09 | Connection | 16 | The upper cover of thejunction box | ||||||||||
| 03 | Pressure switch | 10 | Deep groove ball bearings | 17 | Stator coil | ||||||||||
| 04 | Water inlet | 11 | Rotor | 18 | Enclosure | ||||||||||
| 05 | Filter mesh | 12 | Deep groove ball bearings | 19 | Post-wind leaves | ||||||||||
| 06 | Pump body | 13 | Cable | 20 | Back cover | ||||||||||
| 07 | Impeller | 14 | The bottom coverofthejuncion box | 21 | Feet | ||||||||||
Technical Parameter
| Model | Max.flow m³h |
Max.head m |
Rated flow m³/h |
Rated head m |
Rated power kW |
Rated voltage V |
Rated current A |
Max.suction m |
Range of use of head m |
Piping inner diameter mm |
Weight kg |
Packaging Size mm |
|||||
| PW200 | 2.0 | 24 | 1.0 | 10 | 0.2 | 220 | 1.0 | 8 | 0-20 | 20 | 8.3 | 295*230*305 | |||||
| PW300 | 2.2 | 30 | 1.0 | 14 | 0.3 | 220 | 1.9 | 8 | 0-26 | 25 | 9 | 295*230*305 | |||||
| PW400 | 2.4 | 36 | 1.0 | 16 | 0.4 | 220 | 2.7 | 8 | 0-32 | 25 | 9.3 | 295*230*305 | |||||
| PW600 | 3.0 | 42 | 1.5 | 18 | 0.6 | 220 | 3.9 | 8 | 0-38 | 25 | 12.1 | 315*245*330 | |||||
| PW800 | 3.4 | 50 | 1.5 | 20 | 0.8 | 220 | 5.2 | 8 | 0-46 | 25 | 13.6 | 315*245*330 | |||||
| PW1100 | 6 | 55 | 2.5 | 30 | 1.1 | 220 | 7.0 | 8 | 0-50 | 40 | 20.7 | 365*280*380 | |||||
| PW1100L | 6 | 55 | 2.5 | 30 | 1.1 | 220 | 7.0 | 8 | 0-50 | 40 | 27.6 | 485*305*645 | |||||
| Model | Maxflow m³/h |
Maxhead m |
Rated flow m³/h |
Rated head m |
Rated power kW |
Rated voltage V |
Rated current A |
Max.suction m |
Range of use of head m |
Piping inner ciameter mm |
Weight kg |
Packaging Size mm |
|||||
| PW128(Z) | 1.9 | 20 | 1 | 10 | 0.128 | 220 | 1.0 | 8 | 0-18 | 25 | 8 | 295*230*305 | |||||
| PW200(Z) | 2.0 | 24 | 1.0 | 10 | 0.2 | 220 | 1.0 | 8 | 0-20 | 20 | 8.3 | 295*230*305 | |||||
| PW300(Z) | 2.2 | 30 | 1.0 | 14 | 0.3 | 220 | 1.9 | 8 | 0-26 | 25 | 9 | 295*230*305 | |||||
| PW400Z) | 2.4 | 36 | 1.0 | 16 | 0.4 | 220 | 2.7 | 8 | 0-32 | 25 | 9.3 | 295*230*305 | |||||
| PW600(Z) | 3.0 | 42 | 1.5 | 18 | 0.6 | 220 | 3.9 | 8 | 0-38 | 25 | 12.1 | 315*245*330 | |||||
| PW800(Z) | 3.4 | 50 | 1.5 | 20 | 0.8 | 220 | 5.2 | 8 | 0-46 | 25 | 13.6 | 315*245*330 | |||||
| PW1100(Z) | 6 | 55 | 2.5 | 30 | 1.1 | 220 | 7.0 | 8 | 0-50 | 40 | 20.7 | 365*280*380 | |||||
| PW1100(ZL) | 6 | 55 | 2.5 | 30 | 1.1 | 220 | 7.0 | 8 | 0-50 | 40 | 27.6 | 485*305*645 | |||||
*Synchronous speed:3000 r/min Internal heat protector
Booster pump
Patent Certification
Booster pump
A deep well pump motor capable of automatically balancing pressure differentials
A type of sand and gravel deep well pump motor
A shielded multi-stage booster pump
A long-life multi-stage booster pump
A low-noise pipe pump
In-pipe pump
A stationary ring assembly on an electric motor
A multi-stage in-pipe pump
A type of axial zero displacement coupling
Self-priming electric pump (fully automatic vortex type)
包装箱
A shielded multi-stage booster pump
A deep well pump motor that can automatically balance the differential pressure
An anti-sand and gravel deep well pump motor
Enterprise advantages
The company is committed to the research and development,production and sales of shielded deep-well pumps
Location & Industrial Advantage
Based in Daxi, Wenling, China’s hometown of water pumps with complete industrial support
Eco-friendly Product Advantage
Self-developed canned deep well pump, pollution-free liquid & water cooling, eco-friendly for wide applications
Integrated R&D, Production & Sales
Integrated R&D, production and sales with strict full-range quality control
Integrity & Cooperation
Insist on quality & credibility, pursue innovation, welcome global partners for cooperation
Product Inquiry
If you have more needs, please feel free to leave a message, and we will reply to you once we receive the information!
Need Help with Your Pump Project?
Get expert support for pump selection, system design, and quotation.
Mobile website
TikTok